September 20, 2018

Craft: DIY Resin Pendants

Every now and then I craft a batch of these resin pendants using various methods, and I’m sharing with you today how I’ve made these hand-painted necklace pendants.



You will need:

-Resin
There are so many brands of resin to use. I’ve been using one called “Glass Coat”. They are sold as a two-part epoxy kit that you mix together. The individual brands will state on the bottles whether they are suitable for coating. 
-Wide wooden stirrer
-Wooden craft disks (I used 1 1/2”)
-Bails
-Gesso
-Acrylic Paint
-Sealer (I used a water-based gloss varnish)
-Necklace or cord and closure of your choice
-Small propane torch
-E6000 glue

First, seal your wooden disks using gesso.

Once dry, paint them however you like. I just "doodle painted". I had no plan; I just started painting. If you don’t like anything you’ve done, just paint over it! There’s no pressure here, and that’s the beauty of acrylics :) 



Paint the backs of the pendants in a solid colour.

Once my designs were dry, I sealed them using the gloss sealer front, back, and sides. 

Leave to dry.





Now, mix your resin. Pour the two parts of your resin into a disposable container, and mix following the directions on the bottle of your particular brand using the wooden stirrer. 

Place your pendants on some paper (baking paper provides extra protection if you need it) to protect your working surface. Pour the resin on, or ‘spoon’ on like I have in the photo using my stirrer stick, and gently coax the resin up to the sides of the disk using the stirrer. The surface tension keeps the resin from dripping over the sides, although unfortunately that sometimes happens!


Using the propane torch, quickly run over the resin close to the surface, but not touching the resin with the flame. This will pop any little air bubbles.


Leave in a dust free area to cure. I place a large lid over my work to keep dust off. You just have to make sure the lip is deep enough so it doesn’t touch the pendants.

Glue bails on the pendants using E6000 glue.


Once the glue is dry, thread your pendants onto cord or necklace, and enjoy!



Jules :)

4 comments:

Anonymous said...

Everything is very open with a precise explanation of the issues.
It was truly informative. Your website is useful. Thank you
for sharing!

Anonymous said...

Your style is unique in comparison to other people I have read stuff from.
Thank you for posting when you have the opportunity, Guess
I'll just book mark this page.

Anonymous said...

This is really interesting, You're a very skilled blogger.
I have joined your rss feed and look forward to seeking more of your fantastic post.
Also, I have shared your website in my social networks!

Anonymous said...

My partner and I absolutely love your blog and find
nearly all of your post's to be exactly I'm looking for.

Does one offer guest writers to write content to suit your
needs? I wouldn't mind composing a post or elaborating on many of the subjects you write related to here.
Again, awesome site!

LinkWithin

Related Posts Plugin for WordPress, Blogger...
01 09 10